* Up and down braking in accordance with the en 81:20 and En 81:50 lift directives.
* Cuts the safety contact first according to en 81:20 and EN 81:50, then brakes.
* Can be installed in engine room and well.
* Tensioner pulley with safety contacts .
* Available for overhaul and modernization.
* Adjusted and sealed according to Nominal speeds.
* Connection holes are suitable for other speed regulators.
* Suitable for hydraulic and electric elevators.
* Easy to install, maintenance-free.
* Optional remote control system, encoder and UCM coil are applied.
* Short Crash time.
* 24 VDC / 3.60 amp ( Cable Brown / 8m Square diode ) - 190vdc / 0.38 amp ( Cable Brown ) safety coil.
* Coil control switch.
* Delivered mounted on speed regulator. It is not compatible with any other brand speed regulators.
* Available for revision.
* 190 VDC coils are more powerful, less affected by current losses, and our company recommends a longer stay of energy.
* 100% safe in power outages thanks to the principle of complete mechanical locking.
* Ø8 mm shaft diameter is compatible with rotary type encoder.
* Gear ratio is 1/3. (Rotation speed on board should be set to 3 times less )
* Push, pull power: 0.85 kg
* Braking coil 220 V, 0.52 amp (Cable blue color-8m Square diode ), 354 ohm-24 v, 8.05 amp ( Cable yellow color )
* Connection to cables via Terminal
* 190 VDC coils are more powerful, are less affected by current losses and have a longer duration of energy, our company recommends.
